Senior Embedded Systems/IoT Hardware Architect Fixed-scope for expert 100 hours over 4 weeks 25 h/week fractional

SC21 OPTIONS PTE LTD Remote 2026-11-21

Core Requirements (Candidate Profile)


Mandatory:



  • Proven
    experience preparing electronic products for IEC 60601-1 or IEC 62368-1
    laboratory testing

  • Native
    Espressif ESP-IDF and NimBLE experience is essential;
    Arduino-framework-only backgrounds are not suitable for this engagement

  • Expertise
    in PCB design/layout optimization for EMC compliance (shielding, galvanic
    isolation, 2xMOPP requirements, split ground planes)

  • Experience
    formatting files for automated SMT assembly lines (centroid data,
    fiducials, panelization)

  • Must
    possess an independent, fully-equipped home hardware testing laboratory
    (oscilloscope, logic analyser, and relevant test equipment)


Preferred:



  • Prior
    involvement in CB Scheme or MDR regulatory submissions (qualifies for
    the top of the rate band: 200 PLN/h / ~47 EUR/h)

  • Familiarity
    with high-voltage / voltage-multiplier circuit design

  • Experience
    with BLE coexistence and EMI debugging in mixed-signal designs













































Item



Detail



Role



Senior
Embedded Systems / IoT Hardware Architect



Contract
type



B2B
(Jednoosobowa działalność gospodarcza — sole proprietorship)



Duration



4 weeks
from commencement, with a planned extension into certification-support and
design-transfer phases



Allocation



25
hours/week (~5 hours/day; candidate controls their own schedule, provided a
daily ~30-minute sync window overlaps with the Client), 100 hours total



Location



Remote
(Poland-based; candidate must have access to own electronics lab)



Remuneration



170–200
PLN/h (~40–47 EUR/h)
;
up to 200 PLN/h (~47 EUR/h) for candidates with prior CB Scheme
submission experience — invoiced weekly, paid within 2 working days



Weekly
equivalent



4,250–5,000
PLN gross/week (~990–1,160 EUR)
based on 25 h/week



Total
contract value



17,000–20,000
PLN (~3,950–4,650 EUR)

for the 4-week / 100-hour engagement



Follow-on



Planned
DFM support retainer (~10 h/month at the same rate) plus two further hardware
projects in the pipeline for a proven performer


,[1. Written verification audit report with prioritized remediation plan (Phase 1), 2. Updated PCB design files (source + Gerbers) with corrected HV multiplier topology, production power supply, and EMC/isolation improvements, 3. Updated firmware repository with BLE stability fixes, documented build environment, 4. SMT-ready manufacturing package (centroid files, panelization, fiducial documentation), 5. Certification readiness documentation package for IEC 60601-1 / CB Scheme submission, 6. Final handover: walkthrough session and recorded summary of outstanding risks, Priority rule: If, by the end of Week 3, Tier 1 work (Phase 2) has consumed more than 85% of total contracted hours, Tier 2 deliverables move to an agreed extension week at the same hourly rate — decided jointly by the Parties and confirmed in writing, not deferred silently., Respin carve-out: Any remediation identified in Phase 1 that can only be physically validated on a newly fabricated PCB (respin) shall be delivered as design + validated simulation within this engagement; physical prototype validation shall be scoped separately and is explicitly excluded from the 4-week duration.] Requirements: nimble, • Native Espressif ESP-IDF, Arduino-framework, PCB design, layout optimization for EMC compliance, automated SMT assembly lines, electronic products for IEC 60601-1 or I, CB Scheme, MDR regulatory submissions, BLE coexistence, EMI debugging